Disc Oil Centrifuge
Disc Stack Centrifuges are widely used in various industries to keep service oil in good condition. The system maintains oil dry and clean, ensuring safe operation of the equipment.
Centrifugal Separator is especially suitable for oils which contain high water content and coarse mechanical impurities,such as turbine lube oil, marine fuel oil, etc.
- Four models available to accommodate various flow rates
- Separating moisture and particulates simultaneously
- Fluid cleanliness grade (NAS) to 6 or better
- No filtration media needed, low operation cost
- Low watt density heating
- Interlocked preventive mechanism
- Fully automatic operation
- Easy maintenance
- Simple, compact and robust design
|
Item |
COS-100 |
COS-80 |
COS-50 |
COS-20 |
|
Power supply |
380V／50HZ |
|||
|
Flow rate |
6000L/H |
4800L/H |
3000L/H |
1200L/H |
|
Motor Power |
7.5KW |
5.5KW |
4.0KW |
4.0KW |
|
Inlet caliber |
1″ |
1″ |
1/2″ |
3/8″ |
|
Sediment storage |
6530cm3 |
4160cm3 |
2000cm3 |
950cm3 |
|
Metering Pump |
3HP |
2HP |
1.5HP |
1HP |
|
Centrifuge speed |
≥4250rpm |
≥5000rpm |
≥6000rpm |
≥6500rpm |
|
Working pressure |
0.6—0.7Mpa |
|||
|
Maximum suction (M) |
≥0.4 |
|||
|
Lift(M) |
15 |
|||
|
Water Content |
≤100PPM |
|||
|
Impurity size |
≤5-1µm |
|||
|
Cleanness |
≤NAS6-4 |
|||
|
Particulate contamination |
≤4( SAE749D) |
|||
|
Start-up pressure |
0.35 ～0.40Mpa |
|||
|
Dirt holding capacity |
Rolling drum contains 1kg，Dirt holding contains 5kg |
|||
